Electrical Double Layer on Liquid Sn–Ga Alloy in Aqueous Solutions

Double-layer parameters of a liquid Sn–Ga electrode in aqueous electrolyte solutions are studied. It is shown that Sn in the alloy with Ga is a surface-active component and is forced out onto a surface layer of the electrode. The double-layer parameters of an Sn–Ga electrode (8 at. % Sn), which are measured in the experimentally accessible range of charges, differ radically from the parameters of Ga electrodes and are close to those of Sn electrode. Hence, an Sn–Ga electrode containing 8 at. % Sn simulates electrochemical properties of a liquid Sn electrode. The difference between reciprocal electronic capacitances of Hg and Sn and a corrected electrochemical work function of Sn are determined. It is shown that the chemisorption interaction of an Sn–Ga electrode with water molecules is virtually absent at charges more negative than –7 C/cm². A potential drop on uncharged Sn, which is associated with water chemisorption, is –20 mV. Thus, the hydrophilicity of Sn is slightly higher than that of Hg, Bi–Ga, Pb–Ga, and Tl–Ga and significantly lower than that of In–Ga, Cd–Ga, and Ga.     

Thermodynamic issues associated with combined cyclic voltammetry and wafer curvature measurements in electrolytes

A thermodynamic framework has been provided for the interpretation of combined cyclic voltammetry and surface stress measurements, the latter being obtained from wafer curvature or beam deflection measurements of a solid electrode as a function of applied potential (so-called voltstressograms). Firstly, the derivation of electrocapillarity equations for solid electrodes has been critically reviewed by starting from the Gibbs adsorption equation appropriate for solid–electrolyte interfaces. This allowed us to demonstrate the critical importance of elastic surface strain in the thermodynamic boundary conditions of the partial derivatives intervening in the interpretation of voltstressograms. From these considerations, it was shown for the first time that the electrocapillarity equations for solid electrodes are not appropriate for describing the variation of surface stress with potential obtained from wafer curvature measurements, because such measurements are intrinsically incompatible with the constant strain condition implied in the electrocapillarity equations. An alternative explanation is provided for the experimentally observed proportionality between the current density, measured in cyclic voltammograms, and the first derivative of surface stress with respect to potential, obtained from voltstressograms.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

Kristallstruktur und Konformation eines linearen Pentapyrrols

The crystal structure of the pentapyrrin1 was determined by X-ray diffraction methodes at two temperatures (298K and 97K). It is the first structure determination of a linear polypyrrole with more than four pyrrole rings. In the crystal, the molecule is located on a crystallographic two-fold axis, which passes through the central pyrrole ring. It assumes a helical overall-conformation, which is stabilized by intramolecular hydrogen bonding. The acidic proton at the nitrogen atom of the central pyrrolic ring is disordered, being observed with half occupancy at two symmetry-equivalent positions off the crystallographic diad. Attempts to remove the disorder by cooling to 97K were unsuccessful, since no indication for a phase transition was detected.

     

PSRK: A Group Contribution Equation of State Based on UNIFAC

A group contribution equation of state called PSRK (Predictive Soave-Redlich-Kwong) which is based on the Soave-Redlich-Kwong equation (Soave, 1972) has been developed. It uses the UNIFAC method to calculate the mixture parameter a and includes all already existing UNIFAC parameters. This concept makes use of recent developments by Michelsen (1990b) and has the main advantage, that vapor-uquid-equilibria (VLB) can be predicted for a large number of systems without introducing new model parameters that must be fitted to experimental VLB-data. The PSRK equation of state can be used for VLB-predictions over a much larger temperature and pressure range than the UNIFAC γ--approach and is easily extended to mixtures containing supercritical compounds. Additional PSRK parameters, which allow the calculation of gas/gas and gas/alkane phase equilibria, are given in this paper. In addition to those mixtures covered by UNIFAC, phase equilibrium calculations may also include gases like CH₄ C₂H₆, C₃H₆, c₄H₁₀, CO₂, N₂, H₂ and CO.     

乙醇-环己烷体系中NaI活度系数的测定与计算

由于非水溶剂的应用日趋广泛,促使物理化学工作者对于溶剂和溶液性质进行研究,同时开展了有关物理化学数据的测定和积累工作,以利于指导实践[1]。目前文献报道含水混合溶剂中的电解质活度系数较多,但非水混合溶剂中电解质活度系数报道较少。电解质浓溶液活度系数的计算方法目前应用较广的是Pitzer半经验算法[2]。Pitzer的算法中具体物系的β(0)、β(1)等系数需从实测活度系数数据拟合求得。孙仁义等通过测定汽液平衡盐效应的方法研究了盐在混合溶剂中的活度系数[3-4]。最近孙仁义等[5]提出了双液比固定条件下含盐体系汽液平衡数据热力学一…     

Synthesis and characterization of macrocyclic vinyl aromatic polymers

The synthesis and characterization by size exclusion chromatography, liquid chromatography, NMR, matrix‐assisted laser desorption/ionization, thermal analysis, and other techniques of well‐defined and narrow molecular weight distribution macrocyclic polystyrene (PS), poly(2‐vinylpyridine), poly(α‐methylstyrene), poly (2‐vinyl‐naphthalene) (P2VN), and poly(9,9‐dimethyl‐2‐vinylfluorene) (PDMVF) containing a single 1,4‐benzylidene, methylidene, or 9,10‐anthracenylidene unit are reviewed. The absorption and emission spectroscopy of PS, P2VN, and PDMVF is also discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2139–2155, 2006     

羟乙芦丁在玻碳电极上的阳极微分脉冲伏安法测定

本文对羟乙芦丁在玻碳电极上的阳极微分脉冲安行为进行了研究，发现在Ｎａ２ＨＰＯ４溶液中（ｐＨ＝８．９５）于＋０．６４Ｖ（ｖｓ．Ａｇ／ＡｇＣｌ）左右产生一个良好的阳极氧化伏安峰，浓度在５～６０ｍｇ／Ｌ之间与峰电流呈线性关系，不需分离直接测定了片剂中的羟乙芦丁含量。电极反应为扩散速率控制的不可逆可程。     

Rheological investigation of the influence of molecular structure on natural and accelerated UV degradation of linear low density polyethylene

Metallocene and Ziegler-Natta (ZN) linear low density polyethylenes (LLDPEs) of different branch types and contents as well as linear high density polyethylene (HDPE) were exposed to natural and accelerated weather conditions. The degree of UV degradation of exposed samples was measured by rheological techniques and results were compared with unexposed polymers. Dynamic shear measurements were performed in an ARES rheometer in the linear viscoelastic range. The degree of enhancement or reduction in viscosity and elasticity was used as a measure of the degree of cross-linking or chain scission, respectively. The degradation results of LLDPE suggest that both cross-linking and chain scission are taking place. Chain scission dominated the degradation at high levels of short chain branching (SCB) and long exposure times. The degradation mechanism of m-LLDPE and ZN-LLDPE is similar; however, m-LLDPE showed a higher degradation rate than ZN-LLDPE of similar M_w and average SCB. ZN-LLDPE was found to be more stable than a similar m-LLDPE. Comonomer type had little influence on degradation. Dynamic shear rheology was very useful in revealing the influence of different molecular parameters and it exposed the degradation mechanism.     

Thermoanalytical characterization of polyphenylacetylene: III. Use of modulated differential scanning calorimetry (MDSC)

Four polyphenylacetylene samples, synthesized using different C₆H₅OH/Mo molar ratios, were investigated thermoanalytically by modulated temperature differential scanning calorimetry (MTDSC) in order to clarify a non-reversible exothermic event observed between 473 and 523 K on normal DSC. A stepwise, non-reversible change in heat capacity suggests the presence of internal reactions within the sample, that are followed by decomposition with loss of volatile products.